Pellet Stove Furnace
Pellet stoves can be used as a second heat source or, if you have proper venting, a primary heating option. They can be purchased as freestanding units or fireplace inserts that can give your home the look of an old-fashioned wood-burning fireplace.
pellet stove stores near me from the hopper into the combustion chamber, where they are burned and produce heat. Sensors monitor the fire and can alter the rate of operation to maintain the desired temperature of the room.
1. Energy Efficiency
Pellet stoves use renewable, non-toxic fuel made from compressed sawdust and other substances. They are typically put in landfills, but can be used to create a clean, efficient source of heat. They aid homeowners in reducing their energy use and consequently greenhouse gas emissions. Many users of pellet stoves say that they have recouped their initial investment in a couple of years, by reducing their heating costs.
Pellets are stronger and more compressed than natural wood, which makes them more efficient for burning. They also produce much less creosote than traditional wood-burning fireplaces. They are also packed in plastic bags that are sealed to keep out moisture, and require less frequent cleaning.
Like other heating systems pellet stoves need to be properly size and vented. A skilled technician can assess your venting requirements and space to ensure the best results.
In the process of installation, the hearth is constructed to the right size, and the vent is installed through a hole that has been cut in your home's siding. The vent can be installed on either a side wall or the roof, based on your preference and the local regulations.
Once the vent and hearth are done, the pellet stove may be plugged in. Certain manufacturers offer the option of a remote control to make it easy to start and keep the fire burning, whereas other manufacturers offer additional sensors that monitor combustion and airflow, flue temperatures, and pressure. If the system is able to determine that it needs more pellets or less, it signals to the auger to speed up or slow it down in line with the needs.
All stoves have a hopper for storage that holds between 35 and 130 pounds of pellets until needed. The size of the hopper determines the frequency at which you have to refill your stove. Larger hoppers allow for longer time periods before refills is needed. A grille draws fresh air from the room and passes it through an exchanger that then blasts heated air into the living space by convection. A grate or auger spreads the pellets, while a pan underneath collects any unburnt ones, along with the combustion residue.
Although pellet stoves are more efficient than wood-burning models they're not as efficient as natural gas furnaces or electricity-powered heaters. The electric components that drive their motorized components require electricity, which could be problematic during an power outage, even though backup systems are available for generators and batteries.
2. Low Maintenance
Pellet stoves can be extremely efficient, but they need some maintenance in order to operate properly. Cleaning your stove and exhaust vent on a regular basis will stop the accumulation of harmful creosote. This could cause a fire or explosion that could cause damage to your stove or even your home.
A pellet stove makes use of natural particles that are compressed (such as kernels, nutshells of corn, or small pieces of scrapwood) made from wood or other substances. An electric auger is used to feed the pellets from a fuel container into the burner and into the combustion chamber. The thermostat you set regulates the speed of pellets being fed to the burner. The fire can continue to roar, or it can be decreased or even extinguished in accordance with the temperature you set. When the fire is out, the ash is dropped into an empty ash tin beneath the burner, which can be easily removed and disposed.
Pellets are made from waste products that could have been discarded when processing lumber. They are renewable resources and release much less dust into the air than traditional wood-burning stoves resulting in a very clean burning heat source. The amount of carbon monoxide, carcinogens, and other harmful chemicals produced by pellet stoves is also far lower than with newer EPA-certified wood stoves.
These appliances are not required to be vented via a chimney, like is the case with traditional wood stoves. Instead, they should be vented through a wall or another exterior structure. Pellet stoves come with flue ports that open at the top or rear of the appliance and are connected to a vent pipe that extends outside the home.
A pellet stove comes with one drawback: you have to purchase or store enough fuel pellets to last the entire winter time. Pellet stove owners typically consume three tons of wood pellets each winter, at a cost of $200 per ton. The costs can increase over time however it's much cheaper than buying and hauling firewood to traditional fireplaces or stove. Make sure that you purchase enough pellets to ensure that your stove can function through the coldest months and that you have the right space to store them (preferably dry, cool and off the ground).
3. Reduce outdoor pellet stove utilize renewable biomass fuels to generate heat, which reduces the need for finite fossil fuels. This reduces carbon footprints and diversifies the sources of energy for homes.
Even the newest woodstoves that are EPA certified emit significantly less than pellet stoves. The emissions from pellet stoves are significantly lower than the ones from gas furnaces. Pellets are made of wood, sawdust and other wood wastes. They may also contain a variety of other substances like soybeans, corn and nutshells, cherry pits and agricultural waste. When they are burned, they release less particulates, which could cause respiratory problems and allergic reactions as well as carcinogens and nitrous oxide.
The primary difference between the wood stove and the pellet stove is the feed system. Pellet stoves come with hoppers that hold the pellets. When the thermostat or sensors suggest that the room is in need of heating, the auger is turned and the pellets are pumped into the combustion chamber, where they are burned and generate heat. The combustion chamber's air is then pumped through a heat exchanger that transfers heat to the blower. This process produces very low emissions, and creosote is not created.
After the hopper has been empty, the ash gets removed using a cyclone and deposited in an ash container. The stove is fitted with a fan that circulates warm, fresh air into the room. The majority of pellet stoves are designed to be maintenance-free and have a large viewing window for you and your family to take in the flames.
The most significant aspect that affects pellet stove emissions is the quality of the pellets. Pellets that are not of the highest quality will cause more emissions. When selecting your pellets, ensure they meet certain standards and do not contain other ingredients, such as petroleum-based or urea-based substances. Look for a company that offers a guarantee and will repair or replace parts in the event of an issue. Certain states provide homeowners with an incentive to pay taxes when they choose to go greener. This is a great way to to offset the initial cost of this kind of stove and make it more affordable to set up.
4. Reduced Noise
Pellet stoves produce very little emissions or smoke compared to wood-burning fireplaces. They also have an electric fan to distribute the heat more evenly throughout the space. This feature is one of the reasons why pellet stoves require much less maintenance than traditional wood stoves. While wood stoves require regular cleaning of chemical residues and particles to avoid deterioration, pellet stoves can be cleaned with an electric vacuum cleaner.
Many manufacturers have designed their stoves so that they are easy to install and operate, as well as maintain. They also offer their stoves in a variety of styles to match your home's decor. Some models include a WIFI app, programmable thermostat and remote control.
Most pellet stoves have an enormous fuel hopper that can accommodate between 35 and 130 pounds of pellets. The pellets are then pumped into the combustion chamber via an auger. The amount of heat produced and the level at which the fire gets depends on the speed at which pellets are fed into the burner. The hopper may be filled with hardwood pellets made from wood with a dense structure such as oak and hickory, or softwood pellets. Many stoves can also burn alternative biomass pellets, such as those made from corn or switchgrass that can be environmentally friendly alternatives.
Pellet stoves emit less smoke and require less maintenance due to the fact that they use a cleaner fuel than wood-burning fireplaces. They don't require chimneys, making them an ideal choice for retrofits and new construction.
Pellet stoves don't require regular cleaning of creosote and other chemicals like wood stoves. They just require periodic inspections to ensure proper operation and maintenance. This may include regular cleaning and inspection of the ash or "clinker" as well as the fans and motors according to the model. Your appliance dealer can provide the proper procedures for your specific brand and model. They can also provide details regarding storage and safety, and help you find the correct fuel for your stove.